OXYGEN mold and dirt remover is active

A neutral odor product based on active oxygen, no chlorine. Designed for effective and quick removal of mold and dirt in the living areas: living rooms, bedrooms, children's rooms, dining rooms, bathrooms and kitchens. It will help remove mold from wallpaper, wood, plaster, stone, ceramics, plastic, leather, textiles, shower curtains and other acid-resistant surfaces. Do not use on acid-sensitive surfaces such as marble, natural stones, etc. Do not spray on non-ferrous metals.

Method of application: Before use, check for fastness of the paint or coating to the product on an inconspicuous area of the surface. Apply the agent onto mold or dirt. Leave for 30 to 60 minutes depending on the degree of damage, if necessary, leave for a longer time or overnight. Rub with a soft brush or sponge, rinse with water. It is recommended to repeat the procedure to remove old stains. Rinse the nozzle mesh with water after use. Note: for long-term protection, after using this product, the manufacturer recommends treating the surfaces with the “Home care” TM “San Clean”.

ATTENTION! WORK IN RUBBER GLOVES. DO NOT SPRAY IN THE EYES, IN CASE OF CONTACT WITH THE SKIN OR EYES, RINSE WITH PLENTY OF WATER FOR 15 MINUTES AND CONSULT A DOCTOR. DO NOT EAT, PROTECT FROM CHILDREN.
 DO NOT MIX WITH OTHER PRODUCTS.

Ingredients:  demineralized water, 5-15% oxygen-based bleach, non-surfactant less than 5%, phosphonates less than 5%.