WASHING AND CLEANING AGENT FOR CLEANUP AFTER REPAIR

RANGE OF APPLICATION

The product is intended for removing problematic types of construction contaminants made on a water basis: most types of putty, primer, paint, as well as felt-tip pen, glue, resin and tape.

PROPERTIES

It does not contain the abrasive, aggressive petrochemical products, chlorine, alkalis and acids, and does not damage the surface. Reduces costs and facilitates the work of cleaning up after construction or repairs in the house.

METHOD OF APPLICATION

Using a spray gun or sponge apply the product evenly to the dirt, depending on the contamination resistance let it work for 5-30 minutes and remove with a sponge, then rinse thoroughly with water. In case of a thick layer of putty or paint solidified traces, after applying the product, use a scraper or spatula. If necessary, repeat the procedure.

KEEP AWAY FROM CHILDREN! KEEP AWAY FROM FIRE! IN CASE OF CONTACT WITH EYES, RINSE IMMEDIATELY WITH PLENTY OF WATER! DO NOT EAT!

COMPOSITION

Demineralized water, anionic surfactants: less than 5%, non-ionic surfactants: less than 5%, organic solvents, a perfume composition and antibacterial additive.