FUGUE RESIDUES, WALL: SALTPETRE AND CEMENT DEPOSITS REMOVER

RANGE OF APPLICATION

The remover can be used both for cleaning after laying new coatings, and for cleaning old, highly polluted surfaces of ceramic tiles, clinker bricks, natural building stone, concrete and other acid-insensitive surfaces.

PROPERTIES

The product effectively removes the remains of cement, lime and mortar, fugue, gypsum residues, rust, organic and inorganic contaminants. 

METHOD OF APPLICATION

Pre-moisten the contaminated areas with a little water, apply the product evenly to the surface with a spray gun or sponge, rub, let it work for 2 to 5 minutes and rinse thoroughly with water. Places that are heavily polluted should be re-treated. After use, rinse the sprayer with water.

Important! First, test the product on an inconspicuous area. Washing away dirt from cement surfaces can cause the cement surface layer to be washed away. Do not apply on acid-sensitive surfaces: coloured tiles (decor), polished and ground marble and concrete blocks, enamel, anodized aluminium, copper, zinc or galvanized parts, bronzed fittings, etc. Apply the product at room temperature. In case of freezing, warm the product to room temperature, its cleaning properties do not change.

USE RUBBER GLOVES. PROTECT YOUR EYES AND SKIN! IN CASE OF CONTACT, RINSE WITH PLENTY OF WATER. KEEP AWAY FROM FIRE! DO NOT EAT!

COMPOSITION

Demineralized water, non-ionic surfactants: less than 5%, organic and inorganic acids, emulsifiers, and a perfume composition.