CHLORINE-FREE MOLD AND FUNGUS REMOVER

RANGE OF APPLICATION

The product has been developed for effective and fast removal of mould and dirt in residential areas: living rooms, bedrooms, children's rooms, dining rooms, bathrooms and kitchens. It will help to remove mould from wallpaper, wood, plaster, stone, ceramics, plastic, leather, textiles, shower curtains and other acid-resistant surfaces. Do not use on acid-sensitive surfaces, such as marble, natural stones, etc. Do not spray on non-ferrous metals.

PROPERTIES

The product has a neutral smell based on active oxygen and does not contain chlorine. It penetrates deeply and quickly kills spores of fungus and mould, removes gray and black spots caused by fungal lesions. It has a prolonged disinfecting and preventing effect.

METHOD OF APPLICATION

Before use, check the stability of the paint or coating to the product on an inconspicuous area of the surface to be cleaned. Apply the remover to a spot of mould or dirt. Depending on the extent of the lesion, soak for 30 to 60 minutes, if necessary, leave for a longer time or overnight. Rub with a soft brush or sponge and rinse with water. To remove old stains, it is recommended to repeat the procedure. After use, rinse the spray net with water.

WORK WITH RUBBER GLOVES. DO NOT SPRAY IN THE EYES, IN CASE OF CONTACT WITH THE SKIN OR EYES, RINSE WITH PLENTY OF WATER FOR 15 MINUTES AND CONSULT A DOCTOR. DO NOT EAT! KEEP AWAY FROM CHILDREN! DO NOT MIX WITH OTHER PRODUCTS.

COMPOSITION

Demineralized water, oxygen-based bleach: 5-15%, non-ionic surfactant: less than 5%, cationic surfactants: less than 5%, and phosphonates: less than 5%.